TP-Link TL-SG105 5-Port Gigabit Desktop Switch vs TP-Link TL-SG1005P 5-Port Gigabit Switch with 4 PoE Ports
Do any endpoints need power over Ethernet, and are you expecting that to add network controls or eliminate the switch’s own power adapter?
Products compared
ASIN B00A128S24
TP-Link TL-SG105 5-Port Gigabit Desktop Switch
Your wired devices use their own power and you want the TL-SG105's documented five-port unmanaged setup.
Last observed offer
$12.99
List Price: $19.79
- Confirm offer eligibility on Amazon
Size: 5 Port, 1 Gigabit
Price checked
Observed condition: new. Coupon and subscription requirements unverified.
ASIN B076HZFY3F
TP-Link TL-SG1005P 5-Port Gigabit Switch with 4 PoE Ports
You need PoE for a compatible camera, phone or access point, and the exact TL-SG1005P revision meets its PoE standard and power draw.
Last observed offer
$39.90
List Price: $59.99
Size: 5 Port, 1 Gigabit
Price checked
Observed offer ends
Observed condition: new. Coupon and subscription requirements unverified.
Prices are per listed package. Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.
Published by Pickoryx · Published 2026-10-20 · Source checked 2026-10-20 22:34 UTC
The main trade-off
The TL-SG105 page describes five plug-and-play Gigabit ports; the TL-SG1005P adds four PoE ports, but its PoE standard and total power budget depend on its hardware revision. Both switches are unmanaged and require their own external adapter.
Quick verdict
Choose by power needs, not Gigabit speed claims: the TL-SG1005P is the documented option for powering compatible devices, but its PoE capability changes by hardware revision. The TL-SG105 is a straightforward five-port plug-and-play switch; neither model is presented as managed, and both need an external adapter.
Choose TP-Link TL-SG105 5-Port Gigabit Desktop Switch if
- Your wired devices use their own power and you want the TL-SG105's documented five-port unmanaged setup.
Choose TP-Link TL-SG1005P 5-Port Gigabit Switch with 4 PoE Ports if
- You need PoE for a compatible camera, phone or access point, and the exact TL-SG1005P revision meets its PoE standard and power draw.
When the recommendation changes
- If the TL-SG1005P listing does not identify a revision and you need a specific PoE standard or budget, verify the label with the seller before relying on its PoE specifications.
- If you need managed network controls rather than a basic unmanaged switch, neither model matches that requirement.
The differences that matter
| Decision point | TP-Link TL-SG105 5-Port Gigabit Desktop Switch | TP-Link TL-SG1005P 5-Port Gigabit Switch with 4 PoE Ports |
|---|---|---|
| Network Ports And Power | TP-Link lists five 10/100/1000 Mbps RJ45 ports on the TL-SG105 page and does not list PoE output there. The page does not identify which TL-SG105 hardware version is associated with ASIN B00A128S24.[1, 2] | The TL-SG1005P has four PoE-capable ports among five Gigabit ports, but the supported standard and budget vary by revision: the U.S. V1 page lists 802.3af and 56 W, while V2 lists 802.3af/at, up to 30 W per port and 65 W total. Later revisions are also listed; the ASIN does not state the shipped revision.[3, 4, 5] |
What this changes: If a camera or access point must receive power over Ethernet, the SG1005P is the documented candidate, but check the unit's revision and the device's PoE standard and wattage before buying. The 30 W figure is per-port ceiling, not four-port simultaneous capacity; the V2 total is 65 W, while V1 is listed at 56 W. If every endpoint has its own power and only wired connections are needed, the SG105 page documents five Gigabit ports without a listed PoE output.[1, 3, 4, 5] The better fit depends on your priorities | ||
| Installation And Management | The TL-SG105 is presented as an unmanaged plug-and-play switch with no configuration required and an external power adapter.[1] | The TL-SG1005P is also presented as unmanaged/plug-and-play with an external power adapter. TP-Link's U.S. support page lists several hardware revisions; V6.0 adds documented Extend Mode and PoE Auto Recovery, but the ASIN does not identify the shipped revision.[3, 4, 5, 6] |
What this changes: Neither model is the choice for a buyer who needs a managed-switch configuration interface; both are described as plug-and-play unmanaged switches and each needs its own external adapter. The SG1005P's PoE output does not remove the switch's own power-adapter requirement. If a later-revision feature such as V6 Extend Mode matters, verify the hardware label rather than assuming the ASIN includes it.[1, 3, 4, 5, 6] No clear winner | ||
Best for your routine
Powering compatible PoE devices from the switch
Best fit: TP-Link TL-SG1005P 5-Port Gigabit Switch with 4 PoE Ports
Based on listed features, not comparative testing.
TP-Link documents four PoE ports on the TL-SG1005P, while the TL-SG105 U.S. page lists five Gigabit ports without listing PoE output. Confirm the SG1005P hardware revision and required power budget before buying.
Adding a few wired ports with a plug-and-play unmanaged switch
No clear winner
Both models are described as five-port Gigabit unmanaged switches requiring no configuration. This does not establish a network-performance winner.
Value and trade-offs
One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.
If the TL-SG1005P costs more when you shop, consider that price only if its exact hardware revision provides the PoE standard and total budget your devices need.
Compare current offers for the exact models and confirm the TL-SG1005P hardware revision before ordering.
Limitations
- The exact hardware revision shipped under ASIN B076HZFY3F is not identified in the product record. TP-Link lists different TL-SG1005P revisions, including V1 at 56 W / 802.3af and V2 at 65 W / 802.3af/at; check the label or seller confirmation for the actual unit.
- TP-Link's U.S. TL-SG105 page currently labels that product End of Life. Confirm availability and applicable support or warranty terms for the specific listing.
- The PoE figures are manufacturer specifications. They do not establish measured network throughput or observed power delivery under a particular installation.
- TP-Link cautions that its stated PoE budget is based on laboratory calculations and may vary with client and environmental conditions.
- No hands-on testing was performed.
- The TL-SG105 page does not identify the hardware version for ASIN B00A128S24; some listed features such as QoS are revision-qualified.
Questions shoppers ask
Can the TL-SG1005P power four devices at 30 W each?
Do not plan on four simultaneous 30 W loads based on that per-port ceiling. TP-Link lists 65 W total for V2 and 56 W for V1, and says V2 manages demand above its total budget by cutting a lower-priority port. Confirm the revision and calculate the combined device draw.
Does PoE add network controls or remove the switch’s own adapter?
No. TP-Link describes both models as unmanaged switches with no configuration interface. It lists an external power adapter for each switch; the TL-SG1005P’s PoE ports send power to compatible connected devices, but the switch still needs its own power connection.
Methodology and sources
Compared the manufacturers' port, PoE, hardware-revision, setup and power-supply information. Revision-specific specifications are kept separate, and rated figures are not presented as measured results.
Research assistance organized the manufacturers' published specifications; no switch, throughput or PoE-load testing was performed.
View 6 sources
- 1.TL-SG105 | 5-Port 10/100/1000Mbps Desktop SwitchTP-Link US · Official specifications · Source checked 2026-10-20 22:34 UTC
Evidence used on this page
- Overview and specifications: port count, unmanaged plug-and-play setup, external adapter, product lifecycle, revision qualification for QoS: TP-Link's U.S. page lists five 10/100/1000 Mbps RJ45 ports, unmanaged plug-and-play setup, a 5 V / 0.6 A external adapter, fanless metal casing, and labels the product End of Life. The page lists 802.1p/DSCP QoS for V2 and later; it does not identify the hardware revision of ASIN B00A128S24.
- 2.Download for TL-SG105 | TP-LinkTP-Link US Support · Official support · Source checked 2026-10-20 22:34 UTC
Evidence used on this page
- Hardware-version selector and regional availability note: The U.S. support page lists TL-SG105 hardware versions V1, V2, V3, V4, V5, V6, V8, V8.60, V9 and V9.60, and says model and hardware-version availability varies by region. This confirms that the model name alone does not identify the unit revision.
- 3.TL-SG1005P | 5-Port Gigabit Desktop Switch with 4-Port PoETP-Link US · Official specifications · Source checked 2026-10-20 22:34 UTC
Evidence used on this page
- V1 overview and specifications: 802.3af, four PoE ports, 56 W budget, plug-and-play setup and external adapter: TP-Link's U.S. V1 page describes four PoE ports among five Gigabit RJ45 ports, 802.3af compliance, and a 56 W PoE budget. It identifies the switch as requiring no configuration and lists an external 48 V / 1.25 A adapter. These are V1-only details, not a claim about every TL-SG1005P revision.
- 4.TL-SG1005P | 5-Port Gigabit Desktop Switch with 4-Port PoE+TP-Link US · Official specifications · Source checked 2026-10-20 22:34 UTC
Evidence used on this page
- V2 overview, PoE budget, port allocation, plug-and-play and power-management description: TP-Link's U.S. V2 page lists five Gigabit RJ45 ports; ports 1–4 support 802.3af/at PoE+, up to 30 W per port with a 65 W total budget. It states the switch needs no configuration, and that when demand exceeds the 65 W total budget it cuts power to a lower-priority port. A 30 W per-port maximum is not four simultaneous 30 W outputs.
- 5.Download for TL-SG1005P | TP-LinkTP-Link US Support · Official support · Source checked 2026-10-20 22:34 UTC
Evidence used on this page
- Hardware-version selector and regional availability note: The U.S. support page lists TL-SG1005P hardware versions V1, V2, V3, V4, V5, V5.60, V6 and V6.60 and says availability varies by region. The Amazon ASIN record and model name alone do not disclose which hardware version ships.
- 6.TL-SG1005P V6.0 DatasheetTP-Link · Official support · Source checked 2026-10-20 22:34 UTC
Evidence used on this page
- Highlights and specifications for V6: 4 PoE+ ports, 65 W budget, Extend Mode and PoE Auto Recovery: TP-Link's V6.0 datasheet lists four PoE+ ports, up to 30 W per port and a 65 W aggregate budget, plus an Extend Mode and PoE Auto Recovery. These V6.0 additions demonstrate revision-specific feature differences; they must not be attributed to the Amazon ASIN without confirming its hardware label.