Mounting Dream MD2380 vs Mounting Dream MD2268-LK
Which mount matches the TV’s rear mounting holes and the way you want to aim the screen?
Products compared
ASIN B00SFSU53G
Mounting Dream MD2380
You need to turn a compatible TV toward different seats, with room for the TV and cables to move.
Last observed offer
$37.99
- Confirm offer eligibility on Amazon
Size: For 32" to 70" TVs, 16" Studs
Price checked
Observed condition: new. Coupon and subscription requirements unverified.
ASIN B00NKYYMAW
Mounting Dream MD2268-LK
Forward tilt suits your viewing location and you have verified the TV, mount revision, hardware, wall and clearance fit.
Last observed offer
$26.99
List Price: $29.99
Size: For 37"-90" TV
Price checked
Observed offer ends
Observed condition: new. Coupon and subscription requirements unverified.
Prices are per listed package. Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.
Published by Pickoryx · Published 2026-10-09 · Source checked 2026-10-09 23:02 UTC
The main trade-off
MD2380 offers articulating swivel but rules out 600×400 mm holes; MD2268-LK documents that pattern but uses a close-wall, forward-tilting design.
Quick verdict
For a TV with 600×400 mm mounting holes, rule out MD2380; consider MD2268-LK only after its other fit checks pass. If your TV is confirmed compatible with both, choose MD2380 for articulating swivel or MD2268-LK for a close-wall, forward-tilting setup. If 600×400 mm and articulating swivel are both mandatory, neither of these two meets the combination.
Choose Mounting Dream MD2380 if
- You need to turn a compatible TV toward different seats, with room for the TV and cables to move.
Choose Mounting Dream MD2268-LK if
- Forward tilt suits your viewing location and you have verified the TV, mount revision, hardware, wall and clearance fit.
When the recommendation changes
- Your TV has 600×400 mm mounting holes.
- You require articulating swivel as well as 600×400 mm compatibility.
- The supplied revision, TV back, weight, wall or clearance fails a compatibility check.
The differences that matter
| Decision point | Mounting Dream MD2380 | Mounting Dream MD2268-LK |
|---|---|---|
| Tv Hole Pattern Fit | Published maximum hole spacing is 400×400 mm. A 600×400 mm pattern is outside that limit.[1, 3] | The manufacturer page and linked manual explicitly include the 600×400 mm endpoint.[2, 4] |
What this changes: For a TV with 600×400 mm rear mounting holes, eliminate MD2380. MD2268-LK remains a candidate only if the TV, mounted load, hardware and wall also meet its requirements. Do not infer every intermediate hole pattern from a maximum.[1, 3, 2, 4] The better fit depends on your priorities | ||
| Viewing Position Adjustment | Articulating arms provide left/right swivel. Numerical travel and adjustment ranges are not used here because the reviewed documents disagree.[1, 3] | A close-wall bracket with forward tilt rather than an articulating swivel arm.[2, 4] |
What this changes: Once your TV is individually confirmed to fit both, choose MD2380 to turn it toward different seating positions. Choose MD2268-LK when a close-wall, forward-tilting arrangement suits the viewing location. Confirm actual TV and cable clearance for the intended movement.[1, 3, 2, 4] The better fit depends on your priorities | ||
Best for your routine
A 600×400 mm TV whose remaining installation requirements pass
Best fit: Mounting Dream MD2268-LK
Based on listed features, not comparative testing.
MD2268-LK documents that hole pattern; MD2380’s published maximum excludes it. Accept the forward-tilting design rather than expecting articulating swivel.
A TV confirmed to fit both, with seating that calls for left/right aiming
Best fit: Mounting Dream MD2380
Based on listed features, not comparative testing.
MD2380’s articulating swivel addresses that need. Verify clearance with your particular screen and cables rather than assuming a guaranteed usable angle.
A TV confirmed to fit both, with a viewing position suited to forward tilt
Best fit: Mounting Dream MD2268-LK
Based on listed features, not comparative testing.
MD2268-LK suits the close-wall preference when that movement is enough; confirm rear connectors and adjustment access before buying.
Value and trade-offs
One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.
Pay for the mechanism your compatible installation needs. A discount cannot fix a hole-pattern mismatch, and a larger printed weight limit does not establish better construction or safety.
There is not enough verified price history here to recommend buying now or waiting.
Limitations
- Check the supplied revision before purchase or reuse. Older MD2380 instructions say 99 lb, while current information says 110 lb; do not apply the newer rating to an older mount. Include accessories in the mounted load and ask Mounting Dream to resolve any discrepancy.
- MD2380’s published movement, reach, folded profile and leveling figures conflict across documents, so no numerical range is promised here. MD2268-LK’s adjustment-hardware descriptions also differ; do not assume tool-free adjustment.
- Neither screen diagonal nor a VESA maximum proves complete compatibility. Verify the actual rear-hole pattern, TV back, required hardware, complete mounted weight, wall/stud arrangement and movement/cable clearance.
- The MD2380 product page and reviewed booklet differ on allowed wall materials. No brick installation is recommended here. Follow the supplied mount and TV instructions; obtain manufacturer clarification and qualified installation help if the wall structure, fasteners or instructions are uncertain.
- No hands-on movement, durability, strength or safety comparison was performed. This buying comparison is not an installation guide.
Questions shoppers ask
Does a smaller-than-maximum VESA pattern automatically fit?
No. VESA describes the spacing between rear mounting holes. The 600×400 mm endpoint is directly documented for MD2268-LK, but a maximum alone is not proof for every intermediate pattern. Check the exact pattern and all the other installation requirements.
Can I reuse an older MD2380 because the current page says 110 lb?
Do not treat a newer web specification as an upgrade to an existing unit. The older B1 instructions specify 99 lb. Identify the actual revision and follow its supplied rating; ask Mounting Dream if the label and instructions disagree.
Is either mount a solution for a 600×400 mm TV that must swivel?
Neither in this pair meets both requirements: MD2380 excludes that pattern and MD2268-LK uses forward tilt rather than an articulating swivel arm. Look for a different mount with both capabilities explicitly documented, then verify the full installation fit.
Methodology and sources
Compared documented mounting-hole endpoints and movement mechanisms, preserving revision conflicts and installation limits. Original booklets were inspected from saved copies.
AI assisted source comparison and drafting. No physical testing was performed.
View 5 sources
- 1.MD2380 manufacturer product pageMounting Dream · Official specifications · Source checked 2026-10-09 22:39 UTC
Evidence used on this page
- Product bullets, lines 101–108; parameter table, lines 141–142: Current model page gives the 400×400 mm endpoint, left/right swivel and 110-lb rating. Conflicting numerical movement fields are excluded.
- 2.MD2268-LK manufacturer product pageMounting Dream · Official specifications · Source checked 2026-10-09 22:39 UTC
Evidence used on this page
- Product bullets, lines 101–108; User manual link, line 149: Names MD2268-LK, 600×400 mm endpoint, 132-lb rating, close-wall forward-tilting design and original manual link.
- 3.Installation booklet D1 linked from the selected MD2380 listingMounting Dream · Official specifications · Source checked 2026-10-09 22:43 UTC
Evidence used on this page
- Printed pages 1–2 and 10; applicability through selected listing document link: Archived original inspected locally: 400×400 maximum, accessory-inclusive 110-lb check, wall and TV-hardware checks, and articulated design. Cover lacks model name; listing association does not certify every shipment revision.
- 4.MD2268-LK installation booklet VN-C1Mounting Dream · Official specifications · Source checked 2026-10-09 22:12 UTC
Evidence used on this page
- Printed pages 1–2, 8–9; linked from exact manufacturer page: Archived original inspected locally: 600×400 endpoint, accessory-inclusive 132-lb check, TV/wall requirements and forward-tilting close-wall bracket. Adjustment illustration uses an Allen key.
- 5.MD2380 older installation booklet B1Mounting Dream · Official specifications · Source checked 2026-10-09 22:43 UTC
Evidence used on this page
- Model-named cover and printed page 1: Archived original text establishes an older 99-lb specification. It is not the selected listing’s current manual and does not date a revision change.