ASUS TUF Gaming 1000W Gold (TUF-GAMING-1000G) vs ASUS ROG Strix 1000W Platinum (ROG-STRIX-1000P-GAMING)
Which exact PSU leaves enough room in my case and supplies the connector types and cable reach my build needs?
Products compared
ASIN B0BZWZYTWJ
ASUS TUF Gaming 1000W Gold (TUF-GAMING-1000G)
Your case has room for the TUF’s 150 mm body and your cable path is short enough for the listed 650 mm CPU and 675 mm 16-pin leads.
Last observed offer
$194.99
- Confirm offer eligibility on Amazon
Size: 1000W
Price checked
Observed condition: new. Coupon and subscription requirements unverified.
ASIN B0DJ1T9VXB
ASUS ROG Strix 1000W Platinum (ROG-STRIX-1000P-GAMING)
Your case layout benefits from the listed 1000 mm CPU leads or 750 mm 16-pin lead, or you want the ROG’s physical fan-mode button.
Last observed offer
$239.99
- Confirm offer eligibility on Amazon
Size: 1000W
Price checked
Observed condition: new. Coupon and subscription requirements unverified.
Prices are per listed package. Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.
Published by Pickoryx · Published 2026-10-20 · Source checked 2026-10-20 18:34 UTC
The main trade-off
The TUF has a 10 mm shorter published body and automatic 0dB fan behavior; the ROG publishes longer CPU/GPU leads and a selectable fan mode, while ASUS pages disagree about the TUF model’s ATX revision.
Quick verdict
The TUF is the more compact body at 150 mm long, versus 160 mm for the ROG. The ROG’s published CPU and 16-pin GPU leads are longer, and its fan control has a physical button; the TUF spec describes automatic 0dB operation. ASUS’s US and India pages disagree about whether TUF-GAMING-1000G is ATX 3.0 or 3.1, so verify the exact box revision if that standard matters.
Choose ASUS TUF Gaming 1000W Gold (TUF-GAMING-1000G) if
- Your case has room for the TUF’s 150 mm body and your cable path is short enough for the listed 650 mm CPU and 675 mm 16-pin leads.
Choose ASUS ROG Strix 1000W Platinum (ROG-STRIX-1000P-GAMING) if
- Your case layout benefits from the listed 1000 mm CPU leads or 750 mm 16-pin lead, or you want the ROG’s physical fan-mode button.
When the recommendation changes
- The case PSU bay provides less clearance than the selected unit body plus the cable room required by the case maker.
- Your exact graphics card or motherboard uses a connector configuration that is not supported by the exact supplied cable set.
- ATX 3.1 is a must-have and the TUF retail-box model/revision cannot be verified against ASUS’s conflicting regional pages.
The differences that matter
| Decision point | ASUS TUF Gaming 1000W Gold (TUF-GAMING-1000G) | ASUS ROG Strix 1000W Platinum (ROG-STRIX-1000P-GAMING) |
|---|---|---|
| Case And Cable Fit | 150 x 150 x 86 mm body; published length is 150 mm.[1] | 160 x 150 x 86 mm body; published length is 160 mm.[5] |
What this changes: If the PSU bay is tight, the TUF body is 10 mm shorter on the published length dimension; still check the case manual for the required space around the PSU and its cables.[1, 5, 4] Best fit: ASUS TUF Gaming 1000W Gold (TUF-GAMING-1000G) | ||
| Power Connections And Controls | The US spec lists one 24/20-pin motherboard connector, two 4+4-pin CPU connectors, one 16-pin PCIe lead (675 mm), and two 650 mm CPU leads; it also lists PCIe 8-pin connector/cable options.[1] | The US spec lists one 24/20-pin motherboard connector, two 4+4-pin CPU connectors, a 750 mm 16-pin-to-16-pin PCIe lead, four 750 mm 6+2-pin PCIe leads, and two 1000 mm CPU leads.[5] |
What this changes: Both sheets list the main motherboard lead and two CPU leads; ROG publishes longer CPU and GPU leads. Match the exact GPU and board sockets to the included cable list and check routing distance before choosing. The actual box contents should be checked because product bundles can vary.[1, 5, 4, 7] The better fit depends on your priorities | ||
| Power Connections And Controls | Conflict: ASUS USA lists TUF-GAMING-1000G as ATX 3.0, while ASUS India lists the same model code as ATX 3.1.[1, 3] | ROG USA lists ROG-STRIX-1000P-GAMING as ATX 3.1.[5] |
What this changes: Do not choose the TUF on an assumed ATX revision: ASUS pages disagree for the same TUF model code. Check the exact package label and seller offer if the revision itself is required.[1, 3, 5] The better fit depends on your priorities | ||
| Power Connections And Controls | No separate 0dB fan button; ASUS says the PSU uses 0dB mode by default and the fan spins up when load reaches a threshold.[1] | A 0dB fan button selects load-threshold fan stop when on; with the button off, the fan continuously spins at all load levels.[5] |
What this changes: The ROG exposes a manual fan-mode choice; the TUF sheet describes automatic default behavior without a separate button. This is a control preference, not evidence of lower noise or better cooling.[1, 5] The better fit depends on your priorities | ||
Best for your routine
A case with only 150–159 mm of PSU body-length allowance, after checking the case maker’s separate cable-clearance requirement
Best fit: ASUS TUF Gaming 1000W Gold (TUF-GAMING-1000G)
Based on listed features, not comparative testing.
The published TUF body is 150 mm long and the ROG is 160 mm long; this comparison does not establish how either fits a particular chassis.
A full-tower or routed build where the longer listed CPU or 16-pin GPU cable reach is needed
Best fit: ASUS ROG Strix 1000W Platinum (ROG-STRIX-1000P-GAMING)
Based on listed features, not comparative testing.
ROG publishes 1000 mm CPU leads and a 750 mm 16-pin lead, compared with TUF’s 650 mm CPU leads and 675 mm 16-pin lead. Confirm the exact box and route.
A builder who wants to choose a semi-passive fan mode with a button or force continuous fan operation
Best fit: ASUS ROG Strix 1000W Platinum (ROG-STRIX-1000P-GAMING)
Based on listed features, not comparative testing.
ROG specifies a physical 0dB fan button for these two modes; TUF specifies automatic default 0dB behavior without that button. This does not establish measured noise superiority.
Value and trade-offs
One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.
Compare the current offers only after checking the exact TUF revision and package. Any premium would need to matter to your case clearance, cable reach, or fan-control preference.
The available price information shows current offers only, not a past-price baseline; it cannot tell you whether to buy now or wait.
Limitations
- ASUS USA lists TUF-GAMING-1000G as ATX 3.0, while ASUS India lists the same model code as ATX 3.1. The pages do not establish which revision is in a particular retail box; check its model label if ATX 3.1 is required.
- ROG says Equalizer cable bundle contents can vary across production batches from Q2 2026; confirm the included accessories on the retail package.
- Published dimensions and cable lengths do not confirm fit in a named case or connector fit for an unspecified motherboard/GPU. Use the exact case, board, GPU, and PSU manuals. No measured noise, efficiency, electrical performance, or reliability comparison is presented.
Questions shoppers ask
How much case clearance do these units need?
ASUS lists the TUF at 150 x 150 x 86 mm and the ROG at 160 x 150 x 86 mm. Check your case manual for PSU body allowance and cable room; the shorter TUF body does not guarantee clearance in a particular case.
Will the included leads reach my motherboard and graphics card?
Both spec sheets list one 24/20-pin motherboard lead and two 4+4-pin CPU leads. ROG lists 1000 mm CPU leads and a 750 mm 16-pin GPU lead; TUF lists 650 mm CPU leads and a 675 mm 16-pin lead. Compare your exact sockets and route with the box contents and device manuals.
Is the TUF version ATX 3.1?
The ASUS USA technical specification for TUF-GAMING-1000G says ATX 3.0; ASUS India’s page for the same model code says ATX 3.1. Treat that as unresolved for a specific offer and verify the retail-box label before buying for the revision. ASUS lists the ROG 1000P as ATX 3.1.
Can I control whether the fan stops at low load?
ASUS says the TUF has no separate 0dB button and uses 0dB mode by default until a load threshold. The ROG has a button: on selects its load-threshold fan mode; off keeps the fan spinning. Those specifications do not show which unit is quieter in a particular PC.
Methodology and sources
Compared the exact TUF-GAMING-1000G and ROG-STRIX-1000P-GAMING model pages for body dimensions, listed connector/cable types and lengths, revision labels, and fan controls. Conflicting regional TUF revision labels remain explicit.
AI-assisted source research and drafting; no physical PSU or PC-build testing was performed.
View 7 sources
- 1.TUF Gaming 1000W Gold - Tech SpecsASUS USA · Official specifications · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- ATX Standard; Cable Connectors; Package Contents; Dimensions; 0dB Fan Button: Lists the US TUF-GAMING-1000G as ATX 3.0; gives 150 x 150 x 86 mm dimensions, connector counts and package cable types and lengths; states there is no 0dB button and the fan runs in 0dB mode by default until load threshold.
- 2.TUF Gaming 1000W GoldASUS USA · Official specifications · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- Engineering; ATX 3.0 Compatible; Fully modular etched cables: ASUS overview identifies the TUF Gaming 1000W Gold product and describes it as ATX 3.0 compatible; used as context for the US model page, not as real-world performance evidence.
- 3.TUF Gaming 1000W Gold - Tech SpecsASUS India · Official specifications · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- ATX Standard; Cable Connectors; Package Contents; Dimensions: For the same TUF-GAMING-1000G model code, this regional technical specification lists ATX 3.1 and describes a 16-pin PCIe Gen 5.1 cable; this conflicts with the ASUS USA page’s ATX 3.0 designation. Cable package details otherwise include CPU x2 (650 mm), native 16-pin x1 (675 mm), and several PCIe leads.
- 4.Installing your Power Supply Unit - TUF GAMING PSU Quick Start GuideASUS · Official support · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- PDF pp. 2-3, English: model variation, chassis and motherboard manuals, bundled cables: The guide says cable/function availability varies by model, directs buyers to the chassis and motherboard manuals for fit and connector locations, and says to use only cables bundled with the PSU.
- 5.ROG STRIX 1000W Platinum - Tech SpecsROG USA · Official specifications · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- ATX Standard; Cable Connectors; Package Contents; Dimensions; 0dB Fan Button: For ROG-STRIX-1000P-GAMING, lists ATX 3.1, 160 x 150 x 86 mm, one 16-pin PCIe connector and four 6+2-pin PCIe connectors; package lists 610 mm motherboard lead, two 1000 mm CPU leads, one 750 mm 16-pin-to-16-pin lead and four 750 mm PCIe leads. A button enables the load-threshold fan mode; off means continuous fan operation.
- 6.ROG STRIX 1000W PlatinumROG USA · Official specifications · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- ATX 3.1 Compatible; 12V-2x6 cable; GPU-FIRST voltage-sensing explanation: Identifies the ROG Strix Platinum model as ATX 3.1 compatible, with native 12V-2x6 connector/cable; describes GPU-FIRST voltage sensing as a configurable feature that uses the IVS cable. No comparative performance inference is made.
- 7.[Power Supply] Models Featuring ROG Equalizer/ROG Equalizer White CablesROG USA Support · Official support · Source checked 2026-10-20 18:34 UTC
Evidence used on this page
- Updated 2026-07-16; lines describing Q2 2026 bundle updates and batch variation: Names ROG-STRIX-1000P-GAMING and says Equalizer cable bundle contents may vary across production batches from Q2 2026, with package details indicated on retail packaging; the IVS cable works only with the corresponding port on models supporting GPU-FIRST.